This flagpole is produced from a single aluminium tube tapered to a smooth and elegant profile. The one-piece construction gives a seamless finish offering the traditional appearance not found in other non-timber poles. To ensure the highest standards of quality, polished cast aluminium cleats, braided marine-grade polyester halyards, machined aluminium tops and durable anodised and powder-coated finishes are used throughout the range.

Features at a glance:

• Perfect for prestigious locations
• One piece, smooth tapered design
• Traditional good looks
• Robust construction
• White powder coated
• Choice of external or internal (vandal-proof) halyard
• Hinged or fixed baseplate
• Traditional truck head, Rotating Arm or Finial

Architectural Flagpole Specification

Height (m):	Base Diameter (mm):	Top Diameter (mm):	Weight (kg):	Recc. Flag Size (m2):
5m	114mm	60mm	10kg	2m2
6m	114mm	60mm	13kg	2m2
7m	114mm	60mm	16kg	3.5m2
8m	114mm	60mm	18kg	3.5m2
10m	165mm	76mm	30kg	4.5m2
12m	165mm	76mm	41kg	8m2

External Halyard
Flagpoles are rigged with high quality braided polyester rope. In the case of external halyard poles, the top pulley is integral within the machined aluminium top. The cleat is polished cast aluminium. If desired, gold finials can be fitted. Tip: to avoid clinking, wrap halyard around pole once.

Internal Halyard
For reasons of both security and aesthetics, internal halyard systems are available. An access door is fitted with a key to ensure security. The rigging includes an internal cam cleat for fastening the halyard and, externally, a weighted rope harness to maintain tension on the flag.

Rotating Arm
Rotating heads can be fitted to all sizes of Architectural Flagpoles up to 10 metres. The head has a full ball bearing action to give a sensitive wind response and the flag is held in place with plastic tubular snap rings and a weighted harness. The flag is replaced by lowering the pole on its hinged base.

Wall-Mounted Brackets
Vertical or angled brackets are available for flagpoles of up to 8m. Made from welded steel with hot dipped galvanised finish, the brackets have a backing plate with holes for 3 M15 bolts 250mm apart.

Standard brackets position the pole 150mm from the wall. Other lengths can be supplied to order.

Yard Arms and Gaffs
For the nautical look, tapered Architectural poles from Banner Box are ideal for fitting with our aluminium, powder-coated yard arms and gaffs. Special galvanised brackets can be supplied to mount either or both of these charismatic additions.

Typically installed in marine, military and cadet environments.

Cast aluminium baseplates can be installed in fixed or hinged format, for straightforward and accurate installation. Details are shown in the table below.

Architectural Flagpole Installation Specification

Height (m):	Foundation (mm):	Foundation Stud (mm):	Stud Length (mm):	Baseplate Centres (mm):
5m	800x600x600mm	M16	500mm	200x200mm
6m	800x600x600mm	M16	500mm	200x200mm
7m	1000x600x600mm	M16	500mm	200x200mm
8m	1000x800x800mm	M16	500mm	200x200mm
10m	1000x800x600mm	M20	600mm	300x300mm
12m	1500x1000x1000mm	M20	600mm	300x300mm